Audio Note Force Spécifications télécharger pdf (Page 13)

The balanced and single ended outputs cannot be used simultaneously!

Select the appropriate output using the toggle switch.

When using a pre amplifier with a true balanced input, the ‘BALANCED / SINGLE

ENDED’ switch may be set in either position.

When set to the ‘BALANCED’ position, the centre tap of the output transformer

secondary is connected to the Fifth Element’s ground.

When set in the ‘SINGLE ENDED’ (unbalanced) position, the secondary ‘floats’ in

relation to the Fifth Element’s ground. This provides the option of either a low or high

common mode impedance to ground at the Fifth Element’s output. Experiment with

both positions to achieve the lowest background hum from the system.

Umbilical A dedicated cable is supplied for connection of the Fifth Element unit

to the Fifth Force power supply unit.

The cable is fitted with Military specification circular connectors, and

can only be installed in one direction; the male connector attaches to

the Fifth Force ‘DC OUT’ socket, the female connector attaches to the

Fifth Element ‘DC INPUT’ socket.

The connectors are a ‘push and twist’ bayonet design, and once the

connector and socket have been aligned, twist the external ring on the

connector to secure it to the socket.

CONNECTION OVERVIEW continued…

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Audio Note Force Spécifications Page 13